Mold Remediation & Drywall Replacement in St. Albert, AB

Comprehensive Mold Remediation Services in St. Albert

St. Albert Drywall Squad delivers complete mold remediation solutions that address contamination at every level, from initial moisture detection through final material disposal. Our certified contractors combine advanced inspection techniques with proven abatement methods to restore your property safely.

Mold Inspection and Moisture Assessment

Your mold remediation project begins with thorough moisture inspection and water-damage assessment. Our contractors use thermal imaging cameras and moisture meters to identify hidden water sources behind walls and under flooring.

We document all affected areas with detailed photographs and measurements. This creates a comprehensive remediation plan tailored to your specific contamination patterns.

Key inspection services include:

• Thermal imaging detection
• Moisture content measurement
• Air quality sampling
• Visual contamination mapping
• Water source identification

The assessment process typically takes 2-4 hours depending on your property size. You receive a detailed report within 24 hours that outlines all contaminated areas and recommended remediation steps.

Our moisture detection equipment can identify problems before visible mold appears. This early detection saves you money by preventing extensive contamination spread.

Professional Mold Removal and Black Mold Abatement

Black mold abatement requires specialized containment procedures to protect your family's health. We establish negative air pressure zones using HEPA filtration systems that prevent spore migration during removal.

Our certified technicians wear full protective equipment while removing contaminated materials. All work follows Health Canada guidelines for safe mold remediation practices.

Abatement process includes:

• Containment barrier installation
• HEPA air filtration setup
• Contaminated surface cleaning
• Antimicrobial treatment application
• Final air quality verification

We use EPA-approved biocides that eliminate mold colonies without creating toxic residues. Your property undergoes clearance testing before we remove containment barriers.

The removal timeline depends on contamination extent, typically ranging from 2-5 days for residential projects. Commercial properties may require additional time based on square footage involved.

Contaminated Material Disposal and Tear-Out

Contaminated drywall tear-out follows strict protocols to minimize spore release during removal. Our team seals all contaminated materials in 6-mil polyethylene bags before transport.

We remove all porous materials that cannot be effectively cleaned, including drywall, insulation, and carpet padding. Non-porous surfaces receive thorough cleaning and disinfection treatment.

Materials requiring disposal:

• Contaminated drywall sections
• Saturated insulation materials
• Moldy carpet and padding
• Affected ceiling tiles
• Compromised wood framing

All contaminated material disposal complies with Alberta environmental regulations. We provide documentation for insurance claims that includes disposal receipts and material inventories.

The tear-out process creates significant debris volume. A typical residential project generates 10-15 bags of contaminated materials requiring specialized disposal.

Commercial Mold Remediation Solutions

Commercial mold remediation in St. Albert requires minimal business disruption while maintaining thorough contamination control. We work during off-hours when possible to preserve your operational schedule.

Large-scale projects involve multiple containment zones that allow partial facility operation during remediation. Our team coordinates with your facility management to maintain essential services.

Commercial services include:

• Phased remediation scheduling
• Multiple containment zones
• Emergency response protocols
• Insurance documentation support
• Regulatory compliance verification

We understand St. Albert's commercial property requirements and work with local building inspectors throughout the process. Your business receives priority scheduling for time-sensitive projects.



Our commercial clients include office buildings, retail spaces, and industrial facilities. Each project receives a dedicated project manager who provides daily progress updates.

Drywall Replacement and Restoration Process

Professional drywall replacement after mold contamination requires systematic assessment, complete material removal, structural repairs, and proper moisture control measures. The restoration process addresses damaged framing, compromised vapor barriers, and wet insulation to prevent future mold growth.

Drywall Assessment and Post-Flood Replacement

Your contaminated drywall requires thorough evaluation to determine the extent of replacement needed. Water-damaged drywall beyond the first foot of visible staining must be removed completely.

Assessment criteria include:

• Moisture levels above 16% wood moisture equivalent
• Visible mold growth on paper backing
• Structural integrity loss from water saturation
• Contamination spread behind wall cavities

Post-flood drywall replacement involves cutting damaged sections at least 12 inches above visible water lines. This ensures complete removal of wicking moisture and hidden mold contamination.

Insurance restoration drywall projects require detailed documentation of all removed materials. Your restoration team photographs damage areas and measures square footage for accurate insurance claims.

Ceiling and Wall Rebuild Services

Ceiling replacement becomes necessary when water damage affects structural integrity or creates extensive mold contamination. Gravity-fed water damage often requires complete ceiling removal to access hidden moisture.

Your wall rebuild process starts with removing all contaminated materials down to the studs. This includes drywall, insulation, and any wood components showing mold growth or structural compromise.

Wall rebuild sequence:

• Structural assessment - Check framing integrity
• Material installation - Vapor barrier, insulation, drywall
• Finishing work - Taping, mudding, sanding, priming

Commercial mold remediation projects often involve extensive wall rebuilds across multiple rooms. Your restoration team coordinates with building management to minimize business disruption during reconstruction.

Framing and Vapor Barrier Repair

Framing repair addresses wood studs damaged by prolonged moisture exposure. Compromised framing members require replacement or reinforcement to maintain structural integrity.

Your vapor barrier repair involves installing new 6-mil polyethylene sheeting with proper overlaps and sealing. Damaged vapor barriers allow moisture infiltration that leads to recurring mold problems.

Repair process includes:

• Removing old, torn barriers completely
• Installing continuous barrier coverage
• Sealing all penetrations and joints
• Ensuring proper overlap at seams

Structural drying services reduce wood moisture content below 19% before installing new barriers. This prevents trapping residual moisture that could cause future mold growth.

Insulation Replacement and Structural Drying

Insulation replacement removes all contaminated fiberglass, cellulose, or foam materials that cannot be effectively cleaned. Wet insulation loses thermal properties and harbors mold growth.

Your structural drying services use industrial dehumidifiers and air movers to remove moisture from framing lumber. Proper drying takes 3-5 days depending on material thickness and moisture levels.

Drying equipment includes:

• Low-grain refrigerant dehumidifiers
• High-velocity air movers
• Moisture monitoring devices
• Temperature control systems

New insulation installation occurs only after achieving proper moisture levels. Your drywall services team verifies dry conditions using calibrated moisture meters before proceeding with wall reconstruction.



Proper installation techniques prevent thermal bridging and maintain consistent R-values throughout the wall assembly.

Expert Drywall Installation, Finishing, and Repair

St. Albert Drywall Squad delivers comprehensive drywall services from initial installation through final finishing touches. Our skilled contractors handle everything from soundproofing installations to complete popcorn ceiling removal projects.

Professional Drywall Installation and Contractors

You need experienced contractors who understand proper drywall installation techniques for your St. Albert property. Our team specializes in residential and commercial drywall installation using precision measuring and cutting methods.

We install drywall sheets with proper spacing and secure fastening to prevent future cracking or sagging. Your project receives attention to detail during the hanging process, ensuring each panel aligns correctly with existing structures.

Our contractors handle various drywall thicknesses and types depending on your specific requirements. Standard 1/2-inch drywall works for most interior walls, while 5/8-inch panels provide better fire resistance and soundproofing.

You can expect our team to prepare surfaces properly before installation begins. We address any framing issues, electrical considerations, or insulation requirements that affect the drywall installation process.

High-Quality Drywall Repair Solutions

Damaged drywall requires professional repair techniques to restore your walls to their original condition. Our repair services address holes, cracks, water damage, and impact damage using industry-standard methods.

Small holes receive mesh patches and joint compound application in multiple coats. Larger repairs may require cutting out damaged sections and installing new drywall pieces that match existing textures.

Common drywall repairs include:

• Nail pops and screw pops
• Corner bead damage
• Stress cracks along joints
• Water-damaged sections
• Impact holes from furniture or doors

You receive seamless repairs that blend invisibly with surrounding surfaces. Our contractors sand each repair smooth and apply primer before any painting work begins.

Seamless Drywall Finishing and Painting

Professional drywall finishing transforms rough installations into smooth, paint-ready surfaces. Our finishing process involves multiple coats of joint compound applied with precision taping techniques.

We apply joint compound in three stages: embedding tape, smoothing joints, and final finishing coats. Each layer requires proper drying time and careful sanding between applications.

Your project receives the appropriate finish level based on its intended use. Level 4 finishes work well for standard paint applications, while Level 5 finishes provide the smoothest surface for high-end paint or wallpaper.

Our team handles all necessary priming and painting coordination. You can choose from various paint types and finishes that complement your interior design goals.

Soundproofing and Popcorn Ceiling Removal

Soundproofing solutions require specialized drywall installation techniques and materials. We install sound-dampening drywall, resilient channels, and acoustic insulation to reduce noise transmission between rooms.

Effective soundproofing methods include:

• Double-layer drywall installation
• Green Glue sound dampening compound
• Resilient channel systems
• Acoustic insulation materials

Popcorn ceiling removal eliminates outdated textured surfaces safely and efficiently. Our contractors test for asbestos content before beginning removal work on ceilings installed before 1980.

You receive complete ceiling restoration after popcorn removal. We repair any underlying damage, apply smooth finishes, and prepare surfaces for new paint or texture applications as desired.

Why Choose St. Albert Drywall Squad

St. Albert Drywall Squad delivers specialized mold remediation and drywall replacement services with deep local knowledge, comprehensive insurance support, and unwavering commitment to customer satisfaction.

Local Expertise and Trusted Service

St. Albert Drywall Squad operates as the leading drywall company specifically serving St. Albert, AB and surrounding areas. Their team possesses extensive knowledge of local building codes, climate conditions, and moisture-related challenges common to the region.

The contractors specialize in advanced mold remediation techniques and drywall repair services. They understand how Alberta's weather patterns contribute to moisture problems and structural damage in residential properties.

Key service areas include:

• Contaminated drywall tear-out and disposal
• Wall rebuild and ceiling replacement
• Framing repair and vapor barrier installation
• Structural drying services

You receive professional service from technicians trained in the latest industry standards. The company maintains proper certifications and follows safety protocols for black mold abatement and contaminated material handling.

Their local presence means faster response times for emergency situations. You can reach them directly at 587-854-3775 for immediate consultation and assessment.

Comprehensive Insurance and Restoration Support

The company provides full insurance restoration drywall services to help you navigate complex claim processes. They work directly with insurance providers to document damage and ensure proper coverage for your restoration project.

Insurance services include:

• Detailed water-damage assessment and reporting
• Moisture inspection with professional documentation
• Post-flood drywall replacement coordination
• Commercial mold remediation for business properties

You receive thorough documentation of all remediation work performed. This includes before and after photographs, moisture readings, and detailed repair specifications required by insurance companies.

The team handles both residential and commercial properties affected by water damage. They coordinate with adjusters and provide accurate estimates that reflect the true scope of necessary repairs.

Commitment to Customer Satisfaction

St. Albert Drywall Squad prioritizes client-focused service throughout every remediation project. They provide free quotes and detailed explanations of recommended work before beginning any restoration services.

The contractors maintain clear communication during all phases of your project. You receive regular updates on progress and any discoveries that may affect the scope or timeline of work.

Customer benefits include:

• Free initial consultation and damage assessment
• Transparent pricing with detailed written estimates
• Quality materials resistant to future mold growth
• Insulation replacement using proper moisture barriers



Their team completes projects efficiently while maintaining high quality standards. You can expect professional workmanship that addresses both immediate damage and prevents future mold problems through proper installation techniques.